Find Shot Blasting Machine, Metal Plate Shot Blasting Machine, Metal Sheet Cleaning Machine on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Crane Control Panel > Sheet Shot Blasting Steel Plate Shot Blasting Machine

Sheet Shot Blasting Steel Plate Shot Blasting Machine

  • Sheet Shot Blasting Steel Plate Shot Blasting Machine
  • Sheet Shot Blasting Steel Plate Shot Blasting Machine
  • Sheet Shot Blasting Steel Plate Shot Blasting Machine
  • Sheet Shot Blasting Steel Plate Shot Blasting Machine

Sheet Shot Blasting Steel Plate Shot Blasting Machine

    Unit Price: 64600~73900 USD
    Min. Order: 1 Set/Sets
    Packaging: Seaworthy packing
    Productivity: 5 sets per month
    Brand: Zhouxiang
    Transportation: Ocean,Land
    Place of Origin: China
    Supply Ability: 10 sets per month
    Certificate: ISO9001, CCC, CE, TUV
    HS Code: 8460909000
    Port: Shanghai,Ningbo,Nantong

Basic Info

Model No.: BP2500-6

Product Description

Sheet Shot Blasting Machine

Sheet Shot Blasting Machine Components:

This shot blasting machine mainly includes: sheet conveying system, shot blast cleaning room, dust-removal system, electrical control system, etc.

The process flow is: load sheet by crane—feed shot—shot blasting—clean the surface of metal sheet—unload work piece by crane

Metal sheet conveying system: it is composed of in-put roller, shot blast room roller and out-put roller. All the rollers are running synchronously, and thus the work piece can move steady. The displacement of work piece on roller is less than 50 mm. There should be a certain distance between work pieces.

Input roller:It is driven separately. The wheels use thickened seamless pipe welding structure. On one side of the roller, there is locating wheel to ensure the right position of work piece, and can prevent off-tracking effectively.

Shot blast room roller:The roller of main shot blasting room is normal roller covered by wear resistant cast iron. The using life of this wear resistant cast iron outside is not less than 1500 hours. Photoelectric switch, compressing roller switch and detecting element are fixed at a suitable position on the roller, to detect the width, height of work-piece. This will ensure that the impeller head can choose the different working way according to different work piece shape. The opening time of impeller head is depended on the distance between work piece and impeller head, which is measured by pulse signal.

Output roller:It is driven separately.

Shot blast cleaning machine: it is the key equipment of this line. Its function is removing the rust and oxide skin on surface, and prepare for next process—painting. It is mainly made up of impeller head (6 sets), cleaning room, and shot recycling system (screw conveyor, hoisting machine, separator, shot holder, and shot supply device), shot recycling scraper, shot cleaning round brush, and blower.

Cleaning room: it is the shot-blasting section, which is made of an anterior auxiliary unit, a shot-holding unit, a shot-cleaning room and a posterior auxiliary unit.

The width and height of both entrance and exit of the cleaning unit are 2800 mm and 700 mm. Its shot-cleaning rolling bush can be adjusted as per the thickness of sheet to ensure the smooth passing of the sheet and to prevent the shot from flying out.

1)there are six projectile ports used for installing shot-blasting device in the shot-blasting unit, and the inside, the top, and four side walls of the projectile port, and the inside wall of shot-bucket are fitted with shield which is made by special alloy of high chromium rare earth, in order to protect the walls of the unit.

2) There would be a large number of pellets piled on the surface of the sheet in the process of blasting for its horizontal position. To avoid this, a high-performance rolling-brush cleaning device is equipped in the cleaning unit. This machine chose such kind of Rolling Brush whose nylon yarn is imitated OSBORN, German, with good wear. And the rigidity and rebound resilience of the brush are very great; the cleaning efficiency is high, its working life will be long, maintenance and replacement will be easy.

3) In the tail of the cleaning unit is equipped with a high-pressure fan, which is used for blowing the residues and dust accumulated on the surface of the workpiece, in order to keep the surface clean and ensure the quality of painting.

4) The chamber body is made by steel and its design and manufacture is in line with the requirements of the Specification of Steel Structure Design in China.

5) Several access doors are set to ensure that operators have enough space for maintenance, and they seal tightly, keep projectile and dust from leaking out.

6) The vertical screw conveyor which is equipped with projectile circulatory system, horizontal screw conveyor, bucket elevator, separating device, etc. are carefully calculated and tested, and all of them are capable of coordinately transporting.

Screw conveyor selects GX series screw device, which has good tightness. The raw material of its impeller is low alloy steel, which has good wear resistance. So it can be used to transport small particles with high wear resistance and specific gravity. Separator is a flow-curtain type; it can separate the metal dust and fragments from the qualified projectile. The clean projectile will be stored at the projectile container, to supply the projectile when shot blasting. Anti-reversing device is installed at the transmission part at the top of bucket elevator, to prevent the belt from reversing when emergency stop.

The dust-clean system: during the shot blasting process, dust will be discharged. If nothing would be done, it will influence the quality of cleaning. Otherwise, the dust is harm to the workshop. This machine has adopted advanced pulse-jet filter dust cleaner; the filter material is a new material, makes the one layer of submicron grade ultra thin fiber sticks to the normal material. The ultra thin fiber arranges densely from each other, the gap is 1% of the bottom fiber. Minimal mesh can stop the submicron grade dust to enter the bottom fiber. So it can form high permeability dust layer. When the dust cannot enter to the filter, it’s easy for the cleaning the filter. And the filtering precision is 5μ, which is so high compared with normal filter with dust clean fabric bag. The dust discharge density is lower than country standards. The dust-collection efficiency is 99.5%, dust-discharge density is lower than ≤100mg/m3

Air duct pumps air from the blasting chamber. There’s no air in, so it will form negative-pressure and stop the dust to flow outside of the chamber

Electric control system:This steel plate prefabricate production line mainly includes feeding and translating device, workpiece conveying system, shot blasting and cleaning machine, ventilating dust collection system. The complete equipment is controlled by normal panel, which has been separated into some different areas according to different working place’s conditions. It’s also equipped indicator lights to show different areas’ working status.

It has main power. Every time when you start or finish work, the ventilator’s air outlet should be open while air inlet should be closed when start. And all the outlet and inlet will be open after the ventilator’s start. Filtrating bag of dust collection system is controlled by pulse controlling valve, and it will blow at regular time.

Sheet Shot Blasting Machine Technical Parameters:



Sheet Size

Sheet Width

2500 mm

Sheet Thickness

6~60 mm

Sheet Length × Height

15000×400 mm

Roller Conveyor

Working Speed

0.5~5 m/min


3×3 kw


13000 mm

Effective Width

2500 mm

Quality Standard

Sheet Surface Cleanliness


Sheet Surface Roughness


Impeller of shot blaster



Shooting Speed


PowerNo.×unit power



Lifting Capacity

120 T/h


7.5 kw


Separating Capacity

120 T/h


4~5 m/s

Longitudinal Screw Conveyor

Conveying Capacity

120 T/h


5.5 kw

Feeding Screw Conveyor

Conveying Capacity

120 T/h


2×4 kw

Shot Feeding Device

Driving Gate Working Gas Pressure

0.4×0.8 Mpa

Dust Cleaning System

Duster Type


Duster Ventilation Capacity

18000 m3/h

Centrifugal Ventilator



Ventilation Capacity

18000 m3/h

Wind Pressure

2022 Pa


15 kw

Shot Cleaning System

Ventilation Speed

18000 m3/h

Fan Power

18.5 kw

Roll Brush Motor Power

3 kw

Total Power

154 kw


7900×3100×3300 mm

Height Over Floor

6600 mm

Depth Under Ground

2400 mm

Sheet Shot Blasting Machine Goods Supply Range:

1. Cleaning room assembly: main cleaning room, sub cleaning room, rubber curtain, guard plate for shot-blasting room, impeller head

2. Roller converter: outdoor roller conveyor, indoor roller conveyor, chain, chain wheel

3. Screw conveying system: longitudinal screw conveying system, feed screw conveying system, hoister, separator, shot supply valve

4. Dust palletizing system: dust pipe, duster, fan, wind pipe, chimney and reverse blowing clean device

5. Electric controlling assembly: electric controlling box

Sheet Shot Blasting Machine General Drawing:

BP2500-6 general drawing

Wuxi Zhouxiang Complete Set of Welding Equipment Co., Ltd.

 Wuxi Zhouxiang complete set of welding equipment plant is a famous China manufacturer of H beam welding equipment. Our factory is located in Wuxi city, China---was established in 1991. The company has fixed assets of more than 20 million US dollars, a factory area of 100,000 square meters, and annual sales of more than 40 million US dollars.We have full control of production from steel plate delivery, through to site installation and commissioning,design and manufacture highly sophisticated heavy engineering machinery, our research and development weld centre also more than 100 engineering. Zhouxiang Complete Set of Welding Equipment Co., Ltd is a national high-tech enterprise, with China's national CCC certification, CE, TüV, GS certification, ISO9001 international quality system certification, etc. Main products of Zhouxiang plant: 1)H beam productions line: CNC control Flame/Plasma cutting machine.H beam assembly machine.H beam welding machine.H beam flange plate straightening machine. H beam shot blasting machine.H beam end face milling machine.H beam assembly-welding-straightening machine.Horizontal H beam productions line etc. 2)BOX column production line: Steel plate groove milling machine.Box column assembly machine.Box column welding machine.Box column electroslag welding.Box beam shot blasting machine.Box beam end face milling machine etc. 3)Welding rotator: Portable pipe rotator.Conventional rotator.Self-aligned welding rotator.Wind tower productions line etc.Anti-creeping welding rotato etc. 4)Welding manipulator: Column and boom.Platform welding manipulator 5)Welding positioner: Tilting positioner.L type welding positioner.Head and tail stock welding positioner etc.

Company Info

  • Company Name: Wuxi Zhouxiang Complete Set of Welding Equipment Co., Ltd.
  • Representative: huizhong xu
  • Product/Service: H Beam Welding Machine , H Beam Assembly Welding Straightening Machine , H beam Horizontal Productions Line , Box Column Productions Line , Automatic Assistant Welding Machine , Street Lamp Post Productions Line
  • Capital (Million US $): 4700000
  • Year Established: 1991
  • Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
  • Export Percentage: 41% - 50%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 31 -40 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 50,000-100,000 square meters
  • Factory Location: No. 68 Huairen Road, Donggang Town, Xishan District, Wuxi, Jiangsu, China
  • Contact Person: Ms. Katherine
  • Tel: +86-0510-88794887
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters